Basements and crawlspaces
Damp foundation walls, carpet laid over concrete, cardboard boxes stored on the floor, or a sump pump that couldn’t keep up.
Wilmington, DE & nearby
Mold remediation in Wilmington, DE
Mold is a water problem first. We find the moisture that’s feeding it, seal off the area, take out what’s damaged, and dry it until the readings say dry. You get the readings, the photos, and a written plan you sign before any work starts.
How it goes
A First Due mold job, in order
Every mold job follows the same steps. Skipping one is how mold comes back.
-
Find the water
We take moisture readings around the growth and past it, so we know how far the wet area really goes. Whether it’s a leak, a basement wall, or a bathroom with no exhaust fan, we find the source and write it down. If the fix is a trade we don’t do, like plumbing or roofing, we tell you who to call.
-
Put the plan in writing
Before work starts you get a written plan: what’s coming out, how the area will be contained, and how we’ll know it’s dry. You sign it and keep a copy.
-
Contain the area
Plastic sheeting goes up before anything gets cut or removed, so the dust and spores stay in the work area and out of the rest of your house.
-
Remove it, don’t cover it
Moldy drywall, insulation, carpet, and other porous materials that can’t be cleaned come out. Hard surfaces get cleaned. We don’t paint over mold, and we don’t spray and leave.
-
Dry it and prove it
Drying equipment stays until the moisture readings show dry. The readings decide when we’re done, not the calendar.
-
Hand you the record
You get before-and-after photos, the readings from start to finish, and your signed plan. After the equipment is picked up, we call within 72 hours to check in.
Where to look
Where mold shows up in Wilmington-area homes
A lot of the houses around here are older rowhomes, twins, and split-levels with basements, and Delaware summers are humid. These are the usual spots.
Bathrooms
No exhaust fan, or one that doesn’t vent outside. Slow leaks behind the tub, shower, or vanity.
Under sinks and behind appliances
Slow drips from supply lines, dishwashers, washing machines, water heaters, and fridge ice-maker lines.
Attics and top-floor ceilings
Roof leaks, ice dams, and bathroom fans that dump moist air into the attic instead of outside.
Around windows and outside walls
Worn flashing or caulk that lets rain in behind the drywall, where you won’t see it for a while.
Anywhere a leak sat
Anything that got wet and wasn’t dried within 24 to 48 hours, which is the window the EPA gives for drying things out to help prevent mold.
Not sure it’s mold? See the common signs of mold, or send us a photo and we’ll help you figure out the next step.
Proof, not promises
What you get on every mold job
- Moisture readings before, during, and after the work
- Before-and-after photos
- A written plan you sign before work starts
- Containment set up before any demolition
- Damaged material removed, not covered up
- Drying equipment that stays until the readings say dry
- A job record you keep for your files, a future buyer, or an insurance claim
- A follow-up call within 72 hours of equipment pickup
Straight talk
What we won’t do
- Spray and leave. A product sprayed on mold doesn’t fix the water behind it. The EPA says the goal of cleanup is to remove the mold, and it doesn’t recommend bleach or other biocides as a routine step.
- Sell you testing you may not need. According to the EPA, if you can see mold, sampling usually isn’t necessary.
- Promise what your insurance will pay. That’s up to your policy and your insurer. We give you clear documentation.
- Start without your signature. No work begins until you’ve read and signed the plan.
Before we get there
What you can do right now
- Stop the water if you can. Close the valve under the sink or behind the toilet, or shut off the main.
- Leave the mold alone. Scrubbing, sanding, or dry-brushing it can put spores into the air. Don’t paint or caulk over it.
- Take a few photos. They help us understand the job, and they’re useful later for your records or a claim.
- Small patch? EPA guidance says that if the moldy area is less than about 10 square feet (roughly 3 feet by 3 feet), you can usually handle it yourself. We’d rather tell you that than sell you a job you don’t need.
- Health worries? If someone in the house has asthma, allergies, or a weakened immune system, talk to a doctor. We’re a remediation company, not a medical provider.
Mold remediation FAQ
Common questions about mold remediation
How much does mold remediation cost?
It depends on how big the affected area is, what materials are involved, how hard it is to get to, and how much drying is needed. We won’t guess at a number over the phone for a job we haven’t seen. After we look and take readings, the written plan spells out the scope, and you’ll know the price before any work starts.
Do I need mold testing first?
Usually not if you can see it. The EPA says sampling usually isn’t necessary when mold is visible, and there are no EPA or other federal limits for mold that a test could “pass” or “fail.” Testing can make sense in some situations, like suspected hidden mold or a buyer who wants documentation. If you want it, an independent inspector is the best choice.
How long does a mold job take?
Removal on a small area can go quickly. Drying is usually what takes the longest, and the moisture readings decide when it’s done. The written plan will tell you what to expect for your job.
Will homeowners insurance cover mold?
It depends on your policy and what caused the mold. Many policies treat mold from a sudden leak differently from mold caused by long-term moisture. Check with your insurer or agent. What we can do is give you clear documentation: photos, readings, and a written scope.
Do you work in rental properties?
Yes. We work with landlords and property managers, and the photos and readings can go in the unit’s file. If you’re a tenant, you can still reach out. We’ll usually need the owner’s OK before doing any work.
Do you come to my town?
We’re based near I-95 in Wilmington and work across New Castle County and nearby Pennsylvania. See the areas we serve, or just call and ask.
More from the U.S. EPA: epa.gov/mold.
Related
Tell us what you’re seeing
Send a photo and a few details, or call. Emergency water and mold calls are answered 24/7.